|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD - 91819C SMPS MOSFET IRFBL10N60A HEXFET(R) Power MOSFET Applications l Switch Mode Power Supply ( SMPS ) l Uninterruptable Power Supply l High Speed Power Switching Benefits Low Gate Charge Qg results in simple Drive Requirement l Improved Gate, Avalanche and Dynamic dv/dt Ruggedness l Fully Characterized Capacitance and Avalanche Voltage and Current l VDSS 600V Rds(on) max 0.61 ID 11A Super-D2 PakTM Absolute Maximum Ratings Parameter ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Max. 11 7.0 44 180 1.4 30 5.0 -55 to + 150 300 (1.6mm from case ) Units A W W/C V V/ns C Applicable Off Line SMPS Topologies: l l Active Clamped Forward Main Switch Notes through are on page 8 www.irf.com 1 2/16/00 IRFBL10N60A Static @ TJ = 25C (unless otherwise specified) Parameter Min. Drain-to-Source Breakdown Voltage 600 V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient --- RDS(on) Static Drain-to-Source On-Resistance --- VGS(th) Gate Threshold Voltage 2.0 --- IDSS Drain-to-Source Leakage Current --- Gate-to-Source Forward Leakage --- IGSS Gate-to-Source Reverse Leakage --- V(BR)DSS Typ. --- 0.69 --- --- --- --- --- --- Max. Units Conditions --- V VGS = 0V, ID = 250A --- V/C Reference to 25C, I D = 1mA 0.61 VGS = 10V, ID = 6.6A 4.0 V VDS = VGS, ID = 250A 25 VDS = 600V, VGS = 0V A 250 VDS = 480V, VGS = 0V, TJ = 125C 100 VGS = 30V nA -100 VGS = -30V Dynamic @ TJ = 25C (unless otherwise specified) gfs Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Coss Coss Coss eff. Parameter Forward Transconductance Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance Min. 7.0 --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. --- --- --- --- 18 40 38 35 1895 254 9.2 2560 67 70 Max. Units Conditions --- S VDS = 50V, ID = 6.6A 63 ID = 11A 14 nC VDS = 480V 26 VGS = 10V, See Fig. 6 and 13 --- VDD = 300V --- ID = 11A ns --- RG = 7.5 --- RD = 27,See Fig. 10 --- VGS = 0V --- VDS = 25V --- pF = 1.0MHz, See Fig. 5 --- VGS = 0V, V DS = 1.0V, = 1.0MHz --- VGS = 0V, VDS = 480V, = 1.0MHz --- VGS = 0V, VDS = 0V to 480V Avalanche Characteristics Parameter EAS IAR EAR Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Typ. --- --- --- Max. 454 11 18 Units mJ A mJ Thermal Resistance Parameter RJC RJA Junction-to-Case Junction-to-Ambient (PCB Mounted,steady-state) Typ. --- --- Max. 0.70 40 Units C/W Diode Characteristics IS ISM VSD trr Qrr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time Min. Typ. Max. Units Conditions D MOSFET symbol 11 --- --- showing the A G integral reverse --- --- 44 S p-n junction diode. --- --- 1.5 V TJ = 25C, IS = 11A, VGS = 0V --- 585 880 ns TJ = 25C, IF = 11A --- 3.8 5.8 C di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) 2 www.irf.com IRFBL10N60A 100 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP 100 I D , Drain-to-Source Current (A) 10 I D , Drain-to-Source Current (A) VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP 10 1 4.5V 4.5V 0.1 0.1 20s PULSE WIDTH TJ = 25 C 1 10 100 1 1 10 20s PULSE WIDTH TJ = 150 C 100 VDS , Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 100 3.0 ID = 11A R DS(on) , Drain-to-Source On Resistance (Normalized) I D , Drain-to-Source Current (A) 2.5 TJ = 150 C 2.0 10 1.5 1.0 TJ = 25 C 0.5 1 4.0 V DS = 50V 20s PULSE WIDTH 5.0 6.0 7.0 8.0 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 80 100 120 140 160 VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature ( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRFBL10N60A 100000 20 VGS , Gate-to-Source Voltage (V) 10000 VGS = 0V, f = 1 MHZ Ciss = C + Cgd, C gs ds SHORTED Crss = C gd Coss = C + C ds gd ID = 11A VDS = 480V VDS = 300V VDS = 120V 16 C, Capacitance(pF) Ciss 1000 12 Coss 100 8 10 Crss 4 1 1 10 100 1000 0 0 10 20 30 FOR TEST CIRCUIT SEE FIGURE 13 40 50 60 VDS, Drain-to-Source Voltage (V) QG , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 100 1000 OPERATION IN THIS AREA LIMITED BY RDS(on) ISD , Reverse Drain Current (A) 10 I D , Drain Current (A) TJ = 150 C 100 10us 10 100us 1ms 1 10ms TJ = 25 C 1 0.1 0.2 V GS = 0 V 0.4 0.6 0.8 1.0 1.2 1.4 0.1 TC = 25 C TJ = 150 C Single Pulse 10 100 1000 10000 VSD ,Source-to-Drain Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRFBL10N60A 12 VDS VGS RG RD 10 D.U.T. + I D , Drain Current (A) -VDD 8 10V 6 Pulse Width 1 s Duty Factor 0.1 % 4 Fig 10a. Switching Time Test Circuit VDS 90% 2 0 25 50 75 100 125 150 TC , Case Temperature ( C) 10% VGS td(on) tr t d(off) tf Fig 9. Maximum Drain Current Vs. Case Temperature Fig 10b. Switching Time Waveforms 1 D = 0.50 Thermal Response (Z thJC ) 0.20 0.1 0.10 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) P DM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.01 0.001 0.00001 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRFBL10N60A 1 5V 1000 EAS , Single Pulse Avalanche Energy (mJ) TOP 800 VDS L D R IV E R BOTTOM ID 4.9A 7.5A 11A RG 20V tp D .U .T IA S + V - DD 600 A 0 .0 1 400 Fig 12a. Unclamped Inductive Test Circuit V (B R )D SS tp 200 0 25 50 75 100 125 150 Starting TJ , Junction Temperature ( C) IAS Fig 12b. Unclamped Inductive Waveforms QG Fig 12c. Maximum Avalanche Energy Vs. Drain Current 10 V QGS VG QGD V D S a v , A v alanc he V olta ge (V ) 740 720 Charge 700 Fig 13a. Basic Gate Charge Waveform Current Regulator Same Type as D.U.T. 680 50K 12V .2F .3F 660 D.U.T. VGS 3mA + V - DS 640 0 2 4 6 8 10 12 A I a v , A v alanche Current (A) IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit Fig 12d. Typical Drain-to-Source Voltage Vs. Avalanche Current 6 www.irf.com IRFBL10N60A Peak Diode Recovery dv/dt Test Circuit D.U.T + + Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer - + RG * * * * dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test + VDD Driver Gate Drive P.W. Period D= P.W. Period VGS=10V * D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt VDD Re-Applied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% ISD * VGS = 5V for Logic Level Devices Fig 14. For N-Channel HEXFET(R) Power MOSFETs www.irf.com 7 IRFBL10N60A Super-D2PakTM Package Outline Dimensions are shown in millimeters (inches) Notes: Repetitive rating; pulse width limited by max. junction temperature. ( See fig. 11 ) ISD 11A, di/dt 220A/s, VDD V(BR)DSS, TJ 150C Starting TJ = 25C, L = 7.5mH RG = 25, IAS = 11A. (See Figure 12) Pulse width 300s; duty cycle 2%. WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 252-7105 IR GREAT BRITAIN: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020 IR CANADA: 15 Lincoln Court, Brampton, Ontario L6T3Z2, Tel: (905) 453 2200 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111 IR JAPAN: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo Japan 171 Tel: 81 3 3983 0086 IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower, 13-11, Singapore 237994 Tel: ++ 65 838 4630 IR TAIWAN:16 Fl. Suite D. 207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan Tel: 886-2-2377-9936 Data and specifications subject to change without notice. 2/2000 8 www.irf.com |
Price & Availability of IRFBL10N60A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |